| Product characteristics |
| Electrical design |
PNP/NPN; (parameterisable) |
| Communication interface |
IO-Link |
| Dimensions [mm] |
250 x 28 x 16.7 |
| Application |
| Media |
dry bulk material; aqueous solutions; oils |
| Cannot be used for |
highly adhesive media |
| Electrical data |
| Operating voltage [V] |
10…30 DC; (IO-Link: 18…30 DC) |
| Current consumption [mA] |
< 50 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Max. power-on delay time [ms] |
1300 |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital outputs: 3 |
| Outputs |
| Electrical design |
PNP/NPN; (parameterisable) |
| Number of digital outputs |
3 |
| Permanent current rating of switching output DC [mA] |
200 |
| Max. resistance switching output [Ω] |
8 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Detection zone |
| Measuring range [mm] |
< 200 |
| Measuring/setting range |
| Detection range [mm] |
228 |
| Set point SP [%] |
5…95 |
| Reset point rP [%] |
4…94 |
| In steps of [%] |
1 |
| Accuracy / deviations |
| Repeatability [% of the final value] |
2 |
| Offset deviation [% of the final value] |
4 |
| Resolution [% of the final value] |
1 |
| Linearity deviation [% of the final value] |
1 |
| Response times |
| Response time [ms] |
1300 |
| Software / programming |
| Parameter setting options |
Damping; hysteresis / window; fault indication; diagnostic function; sensitivity; internal temperature; limitation of measuring range; adjustable switching delay; zero-point calibration; direction of installation; LEDs can be deactivated |
| Interfaces |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
Digital Measuring Sensor Profile, Common Profile |
| SIO mode |
yes |
| Required master port type |
A |
| Process data analogue |
1 |
| Process data binary |
3 |
| Min. process cycle time [ms] |
9.6 |
| IO-Link process data (cyclical) |
| function |
bit length |
| process value |
16 |
| exponent |
8 |
| device status |
4 |
| binary switching information |
3 |
|
| IO-Link functions (acyclical) |
direction of installation; limitation of sensor elements; sensitivity; minimum recognition threshold; Performance in case of a fault; error delay; Damping; LED_Modus; switch-on cycle counter; operating hours counter; switching cycles counter; min./max. process value; internal temperature; min./max. internal temperature; diagnostic data for level |
| Supported DeviceIDs |
| Type of operation |
DeviceID |
| Default |
924 |
|
| Note |
| For further information please see the IODD PDF file under “Downloads” |
|
| Operating conditions |
| Applications |
DIN EN 60654-1 application class B2 |
| Ambient temperature [°C] |
-20…80 |
| Storage temperature [°C] |
-25…85 |
| Protection |
IP 65; IP 67 |
| Mechanical data |
| Weight [g] |
377.5 |
| Dimensions [mm] |
250 x 28 x 16.7 |
| Materials |
PBT; PC; |
| Displays / operating elements |
| Display |
| operation |
1 x LED, green |
| switching status |
3 x LED, yellow |
| function |
20 x LED, green |
|
| Accessories |
| Accessories (optional) |
| adhesive tape: 1 x 23 mm x 240 mm |
|
| Remarks |
| Remarks |
| when used on IO-Link class B masters switching outputs OUT2, OUT3 have to be switched off |
|
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
Connector: 1 x M12 |
| Electrical connection – plug |
| |
Cable: 0.1 m, PUR |
-3669.jpg)
-0208.jpg)
-4434.jpg)
-1451.jpg)
