| Product characteristics |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range |
|
| Process connection |
threaded connection G 1 flat seal |
| Application |
| Special feature |
Gold-plated contacts |
| Application |
totaliser function; for industrial applications |
| Installation |
connection to pipe by means of an adapter |
| Media |
water; glycol solutions; coolants; oil |
| Note on media |
| low-viscosity oils with viscosity: 7…40 mm²/s (40 °C) |
| high-viscosity oils with viscosity: 30…68 mm²/s (40 °C) |
|
| Medium temperature [°F] |
14…176 |
| Pressure rating [bar] |
16 |
| Pressure rating [psi] |
232 |
| Electrical data |
| Operating voltage [V] |
19…30 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA] |
100 |
| Min. insulation resistance [MΩ] |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time [s] |
10 |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Inputs |
| Inputs |
counter reset |
| Outputs |
| Total number of outputs |
2 |
| Output signal |
switching signal; analogue signal; pulse signal; (configurable) |
| Electrical design |
PNP/NPN |
| Number of digital outputs |
2 |
| Output function |
normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] |
2 |
| Permanent current rating of switching output DC [mA] |
250; (per output) |
| Number of analogue outputs |
1 |
| Analogue current output [mA] |
4…20; (scalable) |
| Max. load [Ω] |
500 |
| Analogue voltage output [V] |
0…10; (scalable) |
| Min. load resistance [Ω] |
2000 |
| Pulse output |
flow rate meter |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Measuring/setting range |
| Measuring range |
|
| Display range |
|
| Resolution |
|
| Set point SP |
| 4…1585 gph |
0.06…26.44 gpm |
|
| Reset point rP |
|
| Analogue start point ASP |
|
| Analogue end point AEP |
|
| Max. flow rate |
|
| In steps of |
|
| Volumetric flow quantity monitoring |
| Pulse value |
0.02…9000 * 10³ gal |
| In steps of |
0.02 gal |
| Pulse length [s] |
0,3…2 |
| Temperature monitoring |
| Measuring range [°F] |
14…176 |
| Resolution [°F] |
0.5 |
| Set point SP [°F] |
14.5…176 |
| Reset point rP [°F] |
14…175.5 |
| Analogue start point [°F] |
14…145.5 |
| Analogue end point [°F] |
44.5…176 |
| In steps of [°F] |
0.5 |
| Accuracy / deviations |
| Flow monitoring |
| Accuracy (in the measuring range) |
< ± (3 % MW + 0,2 % MEW) / < ± (5 % MW + 0,5 % MEW); (water; glycol: 35%; oil: viscosity 68 mm²/s at 40 °C) |
| Repeatability |
0,05 gpm; 3 gph |
| Temperature monitoring |
| Accuracy [K] |
± 5,4 (Q > 0,26 gpm) |
| Response times |
| Flow monitoring |
| Response time [s] |
0.25; (dAP = 0) |
| Delay time programmable dS, dr [s] |
0…50 |
| Damping for the switching output dAP [s] |
0…1 |
| Temperature monitoring |
| Dynamic response T05 / T09 [s] |
T09 = 70 (Q > 1 gpm); (water) |
| Software / programming |
| Parameter setting options |
Flow monitoring; quantity meter; Preset counter; Temperature monitoring |
| Operating conditions |
| Ambient temperature [°F] |
14…140 |
| Storage temperature [°F] |
-13…176 |
| Protection |
IP 67 |
| Mechanical data |
| Weight [g] |
1666.5 |
| Materials |
housing: AlMgSi0,5 anodised; Sealing: FKM; connector housing: brass Optalloy-plated; PA 6.6; cover film: PA |
| Materials (wetted parts) |
stainless steel (1.4404 / 316L); FKM; PES; Centellen 200 |
| Process connection |
threaded connection G 1 flat seal |
| Displays / operating elements |
| Display |
| Display unit |
5 x LED, green (gpm, gph, gal, °F, 10³) |
| switching status |
2 x LED, yellow |
| measured values |
alphanumeric display, 4-digit |
| programming |
alphanumeric display, 4-digit |
|
| Accessories |
| Accessories (supplied) |
|
| Accessories (optional) |
| adapter for pipe: 1 x 1/2″ NPT, stainless steel, E40192 |
| adapter for pipe: 1 x 3/4″ NPT, stainless steel, E40193 |
| adapter for pipe: 1 x 1/2″ NPT, brass, E40155 |
| adapter for pipe: 1 x 3/4″ NPT, brass, E40156 |
|
| Remarks |
| Remarks |
| MW = measured value |
| MEW = Final value of the measuring range |
| sealing: only with supplied Centellen seals |
|
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
Connector: 1 x M12; Moulded body: brass, Optalloy-plated; Contacts:
Sản phẩm cùng loại
Chat qua zalo
Để lại thông tin - Nhận giá ưu đãi
Gọi cho CÔNG NGHIỆP VÀ TỰ ĐỘNG HÓA COZIC để nhận tư vấn tốt nhất
Hoặc
Gọi cho CÔNG NGHIỆP VÀ TỰ ĐỘNG HÓA COZIC để nhận tư vấn tốt nhất
Hotline +84 969877126
Địa chỉ - CÔNG NGHIỆP VÀ TỰ ĐỘNG HÓA COZIC
78 Hoà Minh 1 - Hoà Minh - Liên Chiểu - Đà Nẵng - Việt Nam
Văn phòng - CÔNG NGHIỆP VÀ TỰ ĐỘNG HÓA COZIC
VP: 16 Vũ Huy Tấn - Hoà Hiệp Nam - Liên Chiểu- Đà Nẵng- Việt Nam
Thông báo sẽ tự động tắt sau 5 giây ...
|
-4434.jpg)
-1451.jpg)
