| Product characteristics |
| Output signal |
switching signal; analogue signal; (configurable) |
| Measuring range |
| 0…400 bar |
0…5800 psi |
0…40 MPa |
|
| Process connection |
homogeniser connection |
| Application |
| Special feature |
Gold-plated contacts |
| Application |
food and beverage industry |
| Conditionally suitable for |
For gaseous media the application is limited to max. 25 bar. |
| Medium temperature [°C] |
-10…140 |
| Min. bursting pressure |
| 1000 bar |
14500 psi |
100 MPa |
|
| Pressure rating |
|
| Type of pressure |
relative pressure |
| Electrical data |
| Operating voltage [V] |
20…32 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA] |
< 65 |
| Min. insulation resistance [MΩ] |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time [s] |
0.2 |
| Integrated watchdog |
yes |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Outputs |
| Total number of outputs |
2 |
| Output signal |
switching signal; analogue signal; (configurable) |
| Electrical design |
PNP/NPN |
| Number of digital outputs |
2 |
| Output function |
normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] |
2 |
| Permanent current rating of switching output DC [mA] |
250 |
| Switching frequency DC [Hz] |
< 170 |
| Number of analogue outputs |
1 |
| Analogue current output [mA] |
4…20; (scalable 1:4) |
| Max. load [Ω] |
(Ub – 10 V) / 20 mA |
| Analogue voltage output [V] |
0…10; (scalable 1:4) |
| Min. load resistance [Ω] |
2000 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Measuring/setting range |
| Measuring range |
| 0…400 bar |
0…5800 psi |
0…40 MPa |
|
| Set point SP |
| 4…400 bar |
60…5800 psi |
0.4…40 MPa |
|
| Reset point rP |
| 2…398 bar |
30…5770 psi |
0.2…39.8 MPa |
|
| Analogue start point |
| 0…160 bar |
0…2320 psi |
0…16 MPa |
|
| Analogue end point |
| 100…400 bar |
1450…5800 psi |
10…40 MPa |
|
| In steps of |
|
| Factory setting |
| |
SP1 = 100 bar |
rP1 = 92 bar |
| |
SP2 = 300 bar |
rP2 = 292 bar |
| |
ASP = 0 bar |
AEP = 400 bar |
|
| Accuracy / deviations |
| Switch point accuracy [% of the span] |
< ± 1,0 |
| Repeatability [% of the span] |
< ± 0,25; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span] |
< ± 1,0 |
| Temperature coefficient zero point [% of the span / 10 K] |
< ± 0,3; (0…80 °C) |
| Temperature coefficient span [% of the span / 10 K] |
< ± 0,3; (0…80 °C) |
| Response times |
| Response time [ms] |
< 3 |
| Damping for the switching output dAP [s] |
0…4 |
| Damping for the analogue output dAA [s] |
0…4 |
| Max. response time analogue output [ms] |
3 |
| Software / programming |
| Parameter setting options |
zero point; span |
| Operating conditions |
| Ambient temperature [°C] |
-25…80 |
| Storage temperature [°C] |
-40…100 |
| Protection |
IP 67 |
| Mechanical data |
| Weight [g] |
1588.5 |
| Materials |
stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PBT; PEI; FKM |
| Materials (wetted parts) |
stainless steel |
| Min. pressure cycles |
1 million |
| Process connection |
homogeniser connection |
| Displays / operating elements |
| Display |
| Display unit |
3 x LED, green |
| switching status |
2 x LED, yellow |
| function display |
alphanumeric display, 4-digit |
| measured values |
alphanumeric display, 4-digit |
|
| Remarks |
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
Connector: 1 x M12; Contacts: gold-plated |
-4434.jpg)
-1451.jpg)
