| Product characteristics |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Process connection |
threaded connection R 1 DN25 |
| Ar |
| Measuring range [m³/h] |
1.2…366.6 |
| CO2 |
| Measuring range [m³/h] |
0.8…223.6 |
| N2 |
| Measuring range [m³/h] |
0.8…225 |
| Application |
| Application |
for industrial applications |
| Media |
Argon (Ar); carbon dioxide (CO2); nitrogen (N2) |
| Medium temperature [°C] |
0…60 |
| Pressure rating [bar] |
16 |
| Pressure rating [Mpa] |
1.6 |
| Electrical data |
| Operating voltage [V] |
18…30 DC |
| Current consumption [mA] |
< 100 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time [s] |
1 |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Outputs |
| Total number of outputs |
2 |
| Output signal |
switching signal; analogue signal; pulse signal; IO-Link; (configurable) |
| Electrical design |
PNP |
| Number of digital outputs |
2 |
| Output function |
normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] |
2 |
| Permanent current rating of switching output DC [mA] |
250; (per output) |
| Number of analogue outputs |
1 |
| Analogue current output [mA] |
4…20; (scalable) |
| Max. load [Ω] |
500 |
| Pulse output |
consumed quantity meter |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Measuring/setting range |
| Low flow cut-off LFC [m³/h] |
< 3.8 |
| Ar |
| Measuring range [m³/h] |
1.2…366.6 |
| Display range [m³/h] |
0…440 |
| Resolution [m³/h] |
0.2 |
| Set point SP [m³/h] |
3.4…366.6 |
| Reset point rP [m³/h] |
1.8…365 |
| Analogue start point ASP [m³/h] |
0…293.2 |
| Analogue end point AEP [m³/h] |
73.4…366.6 |
| In steps of [m³/h] |
0.2 |
| CO2 |
| Measuring range [m³/h] |
0.8…223.6 |
| Display range [m³/h] |
0…268.2 |
| Resolution [m³/h] |
0.2 |
| Set point SP [m³/h] |
2…223.6 |
| Reset point rP [m³/h] |
1…222.6 |
| Analogue start point ASP [m³/h] |
0…178.8 |
| Analogue end point AEP [m³/h] |
44.8…223.6 |
| In steps of [m³/h] |
0.2 |
| Volumetric flow quantity monitoring |
| Pulse value |
0.001…3 000 000 Nm³ |
| In steps of |
0.001…1000 Nm³ |
| Pulse length [s] |
0,004…2 |
| N2 |
| Measuring range [m³/h] |
0.8…225 |
| Display range [m³/h] |
0…270 |
| Resolution [m³/h] |
0.2 |
| Set point SP [m³/h] |
2.2…225 |
| Reset point rP [m³/h] |
1…224 |
| Analogue start point ASP [m³/h] |
0…180 |
| Analogue end point AEP [m³/h] |
45…225 |
| In steps of [m³/h] |
0.2 |
| Temperature monitoring |
| Measuring range [°C] |
0…60 |
| Display range [°C] |
-12…72 |
| Resolution [°C] |
0.2 |
| Set point SP [°C] |
0.4…60 |
| Reset point rP [°C] |
0…59.8 |
| Analogue start point [°C] |
0…48 |
| Analogue end point [°C] |
12…60 |
| In steps of [°C] |
0.2 |
| Accuracy / deviations |
| Flow monitoring |
| Repeatability [% of the measured value] |
± 1,5 |
| Accuracy (in the measuring range) |
± (6 % MW + 0,6 % MEW); (conditions: installation to DIN ISO 2533; installation in pipes: DN25) |
| Temperature monitoring |
| Accuracy [K] |
± 2; (medium flow in the limit area of the flow measurement range) |
| Response times |
| Flow monitoring |
| Response time [s] |
0.1; (dAP = 0) |
| Damping for the switching output dAP in steps [s] |
0 – 0,2 – 0,4 – 0,6 – 0,8 – 1 |
| Software / programming |
| Parameter setting options |
Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; medium selection |
| Interfaces |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode |
yes |
| Required master port type |
A |
| Process data analogue |
3 |
| Process data binary |
2 |
| Min. process cycle time [ms] |
4.1 |
| Supported DeviceIDs |
| Type of operation |
DeviceID |
| Default |
443 |
|
| Operating conditions |
| Ambient temperature [°C] |
0…60 |
| Storage temperature [°C] |
-20…85 |
| Max. relative air humidity [%] |
90 |
| Protection |
IP 65 |
| Mechanical data |
| Weight [g] |
2029 |
| Materials |
PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; FKM; aluminium powder-coated |
| Materials (wetted parts) |
stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK-GF30; polyester; aluminium |
| Process connection |
threaded connection R 1 DN25 |
| Displays / operating elements |
| Display |
| Display unit |
4 x LED, green (Nl/min, Nm³/h, Nm³, °C) |
| function display |
1 x LED, yellow |
| switching status |
2 x LED, yellow |
| measured values |
alphanumeric display, 4-digit |
| programming |
alphanumeric display, 4-digit |
|
| Display unit |
Nl/min; Nm³/h; Nm³; °C |
| Remarks |
| Remarks |
| MW = measured value |
| MEW = Final value of the measuring range |
| Measuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533. |
|
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
Sản phẩm cùng loại
Chat qua zalo
Để lại thông tin - Nhận giá ưu đãi
Gọi cho CÔNG NGHIỆP VÀ TỰ ĐỘNG HÓA COZIC để nhận tư vấn tốt nhất
Hoặc
Gọi cho CÔNG NGHIỆP VÀ TỰ ĐỘNG HÓA COZIC để nhận tư vấn tốt nhất
Hotline +84 969877126
Địa chỉ - CÔNG NGHIỆP VÀ TỰ ĐỘNG HÓA COZIC
78 Hoà Minh 1 - Hoà Minh - Liên Chiểu - Đà Nẵng - Việt Nam
Văn phòng - CÔNG NGHIỆP VÀ TỰ ĐỘNG HÓA COZIC
VP: 16 Vũ Huy Tấn - Hoà Hiệp Nam - Liên Chiểu- Đà Nẵng- Việt Nam
Thông báo sẽ tự động tắt sau 5 giây ...
|
-4434.jpg)
-1451.jpg)
