| Product characteristics |
| Number of inputs and outputs |
Number of digital outputs: 2 |
| Factory setting |
hydrous media |
| Process connection |
G 1 external thread |
| Application |
| Special feature |
Gold-plated contacts |
| Installation |
suited for installation in existing tuning fork adapters |
| Media |
Liquids |
| Recommended media |
water; hydrous media; oils; oil-based media |
| Cannot be used for |
See the operating instructions, chapter “Function and features”. |
| Probe length [mm] |
38 |
| Tank pressure [bar] |
-1…40; (applications subject to the German Federal Water Act : -0,5…10 bar) |
| Oil |
| Medium temperature [°C] |
-25…100; (applications subject to the German Federal Water Act 0…100 °C) |
| Medium temperature short time [°C] |
-25…150; (1 h; applications subject to the German Federal Water Act : 0…100 °C) |
| Water |
| Medium temperature [°C] |
-25…85; (applications subject to the German Federal Water Act : 0…85 °C) |
| Medium temperature short time [°C] |
-25…150; (1 h; applications subject to the German Federal Water Act : 0…100 °C) |
| Electrical data |
| Operating voltage [V] |
18…30 DC |
| Current consumption [mA] |
< 50 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Inputs / outputs |
| Number of inputs and outputs |
Number of digital outputs: 2 |
| Outputs |
| Total number of outputs |
2 |
| Output signal |
switching signal; IO-Link |
| Electrical design |
PNP |
| Number of digital outputs |
2 |
| Max. voltage drop switching output DC [V] |
2.5 |
| Permanent current rating of switching output DC [mA] |
100 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Measuring/setting range |
| Factory setting |
hydrous media |
| Response times |
| Response time [s] |
< 0.5 |
| Interfaces |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
Smart Sensor: Process Data Variable; Device Identification |
| SIO mode |
yes |
| Required master port type |
A |
| Process data analogue |
1 |
| Process data binary |
2 |
| Min. process cycle time [ms] |
2.3 |
| Supported DeviceIDs |
| Type of operation |
DeviceID |
| Default |
449 |
|
| Operating conditions |
| Ambient temperature [°C] |
-20…85 |
| Note on ambient temperature |
| Medium temperature 100…150 °C |
| -40…60 °C |
|
| Storage temperature [°C] |
-40…85 |
| Protection |
IP 68; IP 69K |
| Mechanical data |
| Weight [g] |
398.5 |
| Materials |
stainless steel (1.4404 / 316L); PEEK; PEI; FKM |
| Materials (wetted parts) |
PEEK; surface characteristics : Ra < 0,8 / Rz 4 |
| Process connection |
G 1 external thread |
| Displays / operating elements |
| Display |
| switching status |
LED, yellow |
| operating status |
LED, green |
|
| Remarks |
| Pack quantity |
1 pcs. |
| Electrical connection |
| Connection |
Connector: 1 x M12; Contacts: gold-plated |
-4434.jpg)
-1451.jpg)
