Model |
FT-50AWP |
Type |
DIN-rail mounting type |
Power voltage |
12 to 24 VDC, Ripple (P-P)10% max. |
Powerconsumption |
Normal |
1400 mW (For 12 V), 1600 mW (For 24 V) |
Eco mode |
1150 mW (For 12 V), 1350 mW (For 24 V) |
Display method |
4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm 0.31″,character height in the lower display (green): 5.7 mm 0.22″), Display updating cycle: 10/s |
Operation indicator |
Red LED x 3 (control output1/control output2/timing input indicator) |
Display resolution |
0.1°C or 1°C 0.2°F or 1.8°F (when using FT-H10/H20/H30), 1°C 1.8°F (when using FT-H50/H40K/H50K) |
Hysteresis |
Variable |
Response speed |
HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 15 ms max.) |
Bank selection |
Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks. |
Bank specifications |
Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank. |
External input |
Timing input |
Input time: 2 ms min. |
Bank input |
Input time: 20 ms min. |
Control output |
PNP open collector x 2 channels (N.O./N.C. selectable), 50 mA max. (30 VDC max.), residual voltage: 1 V max. |
Analog output |
4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally. |
Environmental resistance |
Ambient temperature |
-10 to +50 °C 14 to 122 °F (No freezing)*1 |
Relative humidity |
35 to 85 % RH (No condensation) |
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z axis |
Material |
Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chlorideMounting bracket: SUS304 |
Accessory |
DIN anchoring fixture, power cable, unit cover sticker |
Weight |
Approx. 85 g |