Cảm biến áp suất IFM PI2214 -1…10 bar

Product characteristics
Output signal switching signal; analogue signal; IO-Link; (configurable)
Measuring range
 
-1…10 bar -14.5…145 psi -0.1…1 MPa
Process connection Clamp DN40 (1,5″) DIN 32676 (ISO 2852) electropolished
Application
Special feature Gold-plated contacts
Application food and beverage industry
Media viscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C] -25…200
Min. bursting pressure
 
100 bar 1450 psi 10 MPa
Pressure rating
 
50 bar 725 psi 5 Mpa
Type of pressure relative pressure; vacuum
Electrical data
Min. insulation resistance [MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Integrated watchdog yes
2-wire
Operating voltage [V] 20…32 DC
Current consumption [mA] 3.6…21
Power-on delay time [s] 1
3-wire
Operating voltage [V] 18…32 DC
Current consumption [mA] < 45
Power-on delay time [s] 0.5
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
Outputs
Total number of outputs 2
Output signal switching signal; analogue signal; IO-Link; (configurable)
Electrical design PNP/NPN
Number of digital outputs 2
Output function normally open / normally closed; (parameterisable)
Number of analogue outputs 1
Analogue current output [mA] 4…20, invertible; (scalable)
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
2-wire
Max. load [Ω] 300
3-wire
Max. voltage drop switching output DC [V] 2
Permanent current rating of switching output DC [mA] 250
Switching frequency DC [Hz] 125
Max. load [Ω] (Ub – 10 V) / 20 mA
Measuring/setting range
Measuring range
 
-1…10 bar -14.5…145 psi -0.1…1 MPa
Set point SP
 
-0.98…10 bar -14.2…145 psi -0.098…1 MPa
Reset point rP
 
-1…9.98 bar -14.5…144.7 psi -0.1…0.998 MPa
Analogue start point
 
-1…7.5 bar -14.5…108.7 psi -0.1…0.75 MPa
Analogue end point
 
1.5…10 bar 21.8…145 psi 0.15…1 MPa
In steps of
 
0.01 bar 0.1 psi 0.001 MPa
Factory setting
 
  SP1 = 2.50 bar rP1 = 2.30 bar
  SP2 = 7.50 bar rP2 = 7.30 bar
  ASP = 0.00 bar AEP = 10.00 bar
Accuracy / deviations
Switch point accuracy [% of the span] < ± 0,2; (Turn down 1:1)
Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span] < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086)
Linearity deviation [% of the span] < ± 0,15; (Turn down 1:1)
Hysteresis deviation [% of the span] < ± 0,15; (Turn down 1:1)
Long-term stability [% of the span] < ± 0,1; (Turn down 1:1; per year)
Temperature coefficient zero point [% of the span / 10 K] < ± 0,2; (0…200 °C)
Temperature coefficient span [% of the span / 10 K] < ± 0,15; (0…200 °C)
Response times
Damping for the switching output dAP [s] 0…30
Damping for the analogue output dAA [s] 0.01…99.99
2-wire
Step response time analogue output [ms] 45
3-wire
Min. response time of switching output (dAP) [ms] 3
Step response time analogue output [ms] 7
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.0
SDCI standard IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002
Profiles no profile
SIO mode yes
Required master port type A
Process data analogue 1
Process data binary 2
Min. process cycle time [ms] 2.3
Supported DeviceIDs
 
Type of operation DeviceID
Default 103
Operating conditions
Ambient temperature [°C] -25…80
Note on ambient temperature
 
Medium temperature: ≤ 160 °C
Ambient temperature [°C] -25…65
Note on ambient temperature
 
Medium temperature: ≤ 200 °C
Storage temperature [°C] -25…100
Protection IP 67; IP 68; IP 69K
Mechanical data
Weight [g] 1054.6
Materials stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA
Materials (wetted parts) stainless steel (1.4435 / 316L)
Min. pressure cycles 10 million
Process connection Clamp DN40 (1,5″) DIN 32676 (ISO 2852) electropolished
Surface characteristics Ra/Rz of t

Sản phẩm cùng loại

Gửi tin nhắn
Gọi cho chúng tôi
Chat qua facebook
Chat qua zalo
Văn phòng