Product characteristics |
Output signal |
analogue signal |
Measuring range |
0…400 bar |
0…5800 psi |
0…40 MPa |
|
Process connection |
threaded connection G 1/4 external thread (DIN EN ISO 1179-2) |
Application |
Application |
for mobile applications |
Media |
liquids and gases |
Medium temperature [°C] |
-40…125 |
Min. bursting pressure |
1700 bar |
24655 psi |
170 MPa |
|
Pressure rating |
1000 bar |
14500 psi |
100 Mpa |
|
Note on pressure rating |
|
Vacuum resistance [mbar] |
-1000 |
Type of pressure |
relative pressure |
Electrical data |
Operating voltage [V] |
16…32 DC |
Current consumption [mA] |
< 12 |
Min. insulation resistance [MΩ] |
100; (500 V DC) |
Protection class |
III |
Reverse polarity protection |
yes |
Inputs / outputs |
Number of inputs and outputs |
Number of analogue outputs: 1 |
Outputs |
Total number of outputs |
1 |
Output signal |
analogue signal |
Number of analogue outputs |
1 |
Analogue voltage output [V] |
0…10 |
Min. load resistance [Ω] |
2000 |
Short-circuit proof |
yes |
Overload protection |
yes |
Measuring/setting range |
Measuring range |
0…400 bar |
0…5800 psi |
0…40 MPa |
|
Accuracy / deviations |
Repeatability [% of the span] |
< ± 0,05; (with temperature fluctuations < 10 K) |
Characteristics deviation [% of the span] |
< ± 0,8; (incl. drift when overtightened, zero point and span error, non-linearity, hysteresis) |
Linearity deviation [% of the span] |
< ± 0,25 (BFSL) / < ± 0,5 (LS) |
Hysteresis deviation [% of the span] |
< ± 0,2 |
Long-term stability [% of the span] |
< ± 0,1; (per 6 months) |
Temperature coefficient zero point [% of the span / 10 K] |
< ± 0,1 (0…80 °C); < ± 0,2 (-40…0 °C / 80…125 °C) |
Temperature coefficient span [% of the span / 10 K] |
< ± 0,1 (0…80 °C); < ± 0,2 (-40…0 °C / 80…125 °C) |
Response times |
Step response time analogue output [ms] |
2 |
Operating conditions |
Ambient temperature [°C] |
-40…100 |
Storage temperature [°C] |
-40…100 |
Protection |
IP 67; IP 69K |
Mechanical data |
Weight [g] |
61.5 |
Materials |
1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PPS |
Materials (wetted parts) |
1.4542 (17-4 PH / 630) |
Min. pressure cycles |
60 million; (at 1.2 times nominal pressure) |
Tightening torque [Nm] |
25…35; (recommended tightening torque; depends on lubrication, seal and pressure rating) |
Process connection |
threaded connection G 1/4 external thread (DIN EN ISO 1179-2) |
Process connection sealing |
HNBR (to DIN 3869) |
Restrictor element integrated |
yes |
Remarks |
Remarks |
BFSL = Best Fit Straight Line |
LS = limit value setting |
|
Pack quantity |
1 pcs. |
Electrical connection |
Connection |
Connector: 1 x DEUTSCH connector (DT04-3P); Maximum cable length: 30 m |