| Product characteristics | |
| Frequency range [Hz] | 2…10000 |
| Measuring principle | capacitive |
| v-RMS | |
| Measuring range of vibration [mm/s] | 0…45 |
| a-Peak / a-RMS | |
| Measuring range of vibration | 0…50 g 0…490.3 m/s² |
| Application | |
| Application | big machines, performance > 300 kW, speed 120…600 rpm |
| Electrical data | |
| Operating voltage [V] | 18…30 DC |
| Current consumption [mA] | < 50 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Sensor type | microelectromechanical system (MEMS) |
| Inputs / outputs | |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Outputs | |
| Output signal | switching signal; IO-Link |
| Electrical design | PNP/NPN; (configurable) |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed |
| Max. voltage drop switching output DC [V] | 2 |
| Max. current load per output [mA] | 100 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Measuring/setting range | |
| Note on setpoint SP | parameterisable |
| Frequency range [Hz] | 2…10000 |
| Measuring principle | capacitive |
| Number of measurement axes | 1 |
| v-RMS | |
| Measuring range of vibration [mm/s] | 0…45 |
| Set point SP [mm/s] | 0.2…45 |
| Reset point rP [mm/s] | 0…44.8 |
| In steps of [mm/s] | 0.2 |
| a-Peak / a-RMS | |
| Measuring range of vibration | 0…50 g 0…490.3 m/s² |
| Set point SP | 0.2…50 g 2…490.3 m/s² |
| Reset point rP | 0…49.8 g 0…488.3 m/s² |
| In steps of | 0.2 g 2 m/s² |
| Crest | |
| Measuring range of vibration | 1…50 |
| Set point SP | 2…50 |
| Reset point rP | 1…49 |
| In steps of | 1 |
| Temperature measurement | |
| Measuring range [°C] | -30…80 |
| Resolution [°C] | 0.1 |
| Set point SP [°C] | -28…80 |
| Reset point rP [°C] | -30…78 |
| In steps of [°C] | 2 |
| Accuracy / deviations | |
| Accuracy | ≤ 4 kHz +/-10 %; ≥ 4…10 kHz: < 3 dB |
| Accuracy [K] | ± 2,5 K + (0,2 x (Umgebungstemperatur – Oberflächentemperatur)) |
| Linearity deviation | 2% |
| Software / programming | |
| Parameter setting options | Software |
| Diagnostic functions | self-test |
| Interfaces | |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud); COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | Blob (0x0030); Measuring sensor (0x800A); Common Profile (0x4000) |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 10 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 3.6 |
| IO-Link functions (acyclical) | filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; switch points; switching logic |
| Supported DeviceIDs | Type of operation DeviceID |
| Status A (COM2) 1256 | |
| Status B (COM2 / COM3) 1371 | |
| Note | For further information please see the IODD PDF file under “Downloads” |
| Operating conditions | |
| Ambient temperature [°C] | -30…80 |
| Storage temperature [°C] | -30…80 |
| Protection | IP 67; IP 68; IP 69K |
| Mechanical data | |
| Weight [g] | 116.5 |
| Type of mounting | set screw |
| Materials | housing: stainless steel (1.4404 / 316L) |
| Tightening torque [Nm] | 8 |
| Accessories | |
| Items supplied | set screw: 1 x 1/4″ 28 UNF / M8 |
| set screw: 1 x 1/4″28 UNF x 5/8″ DIN916 | |
| Remarks | |
| Pack quantity | 1 pcs. |
| Electrical connection | |
| Connector: 1 x M12; Maximum cable length: 20 m |
Cảm biến độ rung IFM VVB011
Danh mục sản phẩm
-
Cảm biến độ rung IFM VVB011
- Lượt xem: 835
- Cảm biến độ rung IFM VVB011
-4434.jpg)
-1451.jpg)
